BrewKeg12.5 Starter Pack

BrewKeg12.5™ Starter Pack – everything you need to start pressure brewing, without paying for a fridge you may already own.

The Starter Pack is the simplest way to get into WilliamsWarn pressure brewing if you already have a suitable fridge for chilling and dispensing. It combines the BrewKeg12.5 with the key gas, pressure-monitoring, cleaning, clarification and dispensing accessories used throughout the brewing process.

Who is the Starter Pack for?

• New brewers who want to start with a complete BrewKeg setup at a lower upfront cost.
• Existing home brewers who already have a fridge or kegerator they can use for chilling.
• Anyone who wants a compact 12.5L pressure-brewing setup that can be expanded later.

What's included

• 1 × BrewKeg12.5™ stainless steel pressure brewing vessel
• 1 × BrewKeg12.5/25 Sundry Accessory Pack, including non-scratch sponge, spatula, thermometer, BrewClear™ and BrewCleaner
• 1 × 50ml dosing device for adding clarification agent
• 1 × BrewKeg pressure gauge
• 1 × beer dispense line with plastic tap
• 1 × gas dispense line
• 1 × premium Micromatic CO₂ regulator
• 1 × SodaStream adaptor

What you'll provide

You can ferment in a room that stays around 18–28°C, then use your own fridge to chill and clarify the finished brew. You will also need a CO₂ source and your chosen beer, cider or mead ingredients. A SodaStream cylinder is not included.

If you would prefer dedicated temperature control during fermentation, you can add a BrewSnug10/12.5™.

Why start with this pack?

The Starter Pack gives you the core WilliamsWarn brewing system without locking you into a larger setup on day one. You can brew, pressure ferment, chill, clarify and dispense from the BrewKeg12.5, then add a kegerator, Corny kegs, a BrewSnug or extra BrewKegs as your setup grows.

How the BrewKeg process works

1. Clean – prepare the vessel, lid, sediment bottle and beverage line.
2. Mix – add ingredients, water and yeast directly to the BrewKeg.
3. Adjust – ferment under controlled pressure, then chill and clarify.
4. Dispense – serve directly from the BrewKeg or transfer to bottles or a Corny keg.

Want a more complete setup?

If you want refrigeration, dispensing taps, a full-size CO₂ cylinder and dedicated fermentation temperature control included from the start, see the BrewKeg12.5 Complete Pack XL. Want two BrewKeg12.5 vessels for more brewing capacity? See the Complete Pack Plus XL.

If you already own the WilliamsWarn accessories and only want another vessel, the BrewKeg12.5 core unit is also available by itself.

BrewKeg12.5 specifications

• Nominal batch size: 12.5 litres
• Stainless steel pressure brewing vessel
• Height: approximately 74 cm
• Diameter: approximately 28 cm
• Weight: approximately 9.2 kg

See the BrewKeg12.5 specification sheet for full dimensional information.

Watch the BrewKeg in action

Useful WilliamsWarn videos: BrewKeg cleaning and dispensing from a BrewKeg.